Discover 6 stories with “raspberry_pi” Tag.
Execute the following commands to overclock your Raspberry Pi on Arch linux: Open the config file: sudo vim /boot/config.txt ` Uncomment one of the following blocks: ... ##Modest #arm_freq=800 #core_freq=300 #sdram_freq=400 #over_voltage=0
Changing the memory split between ARM and GPU on the Raspberry Pi running Arch linux is simple. Just execute the following commands: Open the config file: sudo vim /boot/config.txt ` Change the gpumem settings: * gpumem_256: GPU memory in
Do this only right after flashing the Arch image onto the SD-Card so if anything goes wrong you do not lose any data. fdisk /dev/mmcblk0 In fdisk: 1. Press ‘p’ to print the partition table: Command (m